User Manual Owner's manual

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012 207
CIP Information Appendix B
The following services will be implemented for the DeviceNet Object.
Assembly Object
CLASS CODE 0x0004
The following class attribute is supported for the Assembly Object:
The following static Assembly instance attributes will be supported for each
Assembly instance:
The following services will be implemented for the Assembly Object:
I/O Assemblies
The following table summarizes the Assembly instances that are supported in the
ArmrorStart EtherNet/IP product:
Service Code
Implemented for:
Service NameClass Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Attribute ID Access Rule Name Data Type Value
1 Get Revision UINT 2
Attribute ID Access Rule Name Data Type Value
1 Get Number of Members in Member List UINT —
2 Get
Member List Array of STRUCT Array of CIP paths
Member Data Description UINT Size of Member Data in bits
Member Path Size UINT Size of Member Path in bytes
Member Path Packed
EPATH
Member EPATHs for each assembly instance
3 Conditional Data Array of BYTE —
4 Get Size UINT Number of bytes in attribute 3
100 Get Name String STRING —
Service Code
Implemented for:
Service NameClass Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
Instance Type Description
3 Consumed Required ODVA Consumed Instance
52 Produced Required ODVA Produced Instance
100 Config Configuration Assembly for Bulletin 290D/291D Starters