User Manual Owner's manual

Rockwell Automation Publication 290D-UM001A-EN-P - June 2012 143
Bulletin 290D/291D/294D Programmable Parameters Chapter 4
Advanced Configuration
KeypadDisable
This parameter disables all keypad
function except for the “OFF” and “RESET”
buttons.
0 = KeypadEnabled
1 = KeypadDisabled
Parameter Number 67
Access Rule GET/SET
Data Type BOOL
Group Misc. Config.
Units —
Minimum Value 0
Maximum Value 1
Default Value 0
SetToDefaults
This parameter if set to “1” will set the
device to the factory defaults.
0 = NoAction
1 = SetToDefaults
Parameter Number 68
Access Rule GET/SET
Data Type BOOL
Group Misc. Config.
Units —
Minimum Value 0
Maximum Value 1
Default Value 0
AccelTime2
When active, sets the rate of acceleration for all speed increases except for jog.
Parameter Number 69
Related Parameters 36
Access Rule GET/SET
Data Type UINT
Group Advanced Config.
Units x.x secs
Minimum Value 0.0
Maximum Value 600.0
Default Value 20.0
Maximum Freq
Accel Time
-------------------------------------- Accel Rate=
Parameter 35
(Maximum Freq)
Speed
Accel
Time 2
0
0
Time
Decel
Time 2
Acceleration
Deceleration