User Manual Owner's manual

106 Rockwell Automation Publication 290D-UM001A-EN-P - June 2012
Chapter 4 Bulletin 290D/291D/294D Programmable Parameters
Advanced Configuration
KeypadDisable
This parameter disables all keypad
function except for the “OFF” and “RESET”
buttons.
0 = KeypadEnabled
1 = KeypadDisabled
Parameter Number 67
Access Rule GET/SET
Data Type BOOL
Group Misc. Config.
Units —
Minimum Value 0
Maximum Value 1
Default Value 0
SetToDefaults
This parameter if set to “1” will set the
device to the factory defaults.
0 = NoAction
1 = SetToDefaults
Parameter Number 68
Access Rule GET/SET
Data Type BOOL
Group Misc. Config.
Units —
Minimum Value 0
Maximum Value 1
Default Value 0
OLWarningLevel
This parameter determines the Overload
Warning Level in % Thermal Capacity Used
(%TCU).
Parameter Number 69
Access Rule GET
Data Type USINT
Group Advanced Config.
Units %TCU
Minimum Value 0
Maximum Value 100
Default Value 85
JamInhibitTime
This parameter determines the time
during motor starting that Jam detection
is inhibited.
Parameter Number 70
Access Rule GET
Data Type USINT
Group Advanced Config.
Units secs.
Minimum Value 0
Maximum Value 250
Default Value 10