Manualshelf

Safety Version - User Manual User guide

ManualsBrandsRockwell Automation ManualsEquipment284D ArmorStart
101102103104105106107108109110
4-38 Bulletin 284 Programmable Parameters for Sensorless Vector Controllers
.
➊ To activate 170 (Preset Freq 0) set 138 (Speed Reference) to option 4 Preset Freq.
➋ When a Digital Input is set to Accel 2 & Decel 2, and the input is active, that input overrides the
settings in this table.
170 (Preset Freq 0) ➊
171 (Preset Freq 1)
172 (Preset Freq 2)
173 (Preset Freq 3)
174 (Preset Freq 4)
175 (Preset Freq 5)
176 (Preset Freq 6)
177 (Preset Freq 7)
Parameter Number 170…173, 174…177
Related Parameters 138, 139, 140, 151, 152, 152,
153, 167, 168, 240…247,
250…257
Access Rule GET/SET
Data Type UINT
Group Advanced Program Group
Units 0.1 Hz
Minimum Value 0.0
Maximum Value 400.0
Default Value See Table 4.A
Table 4.A 170…177 Preset Freq Options
Values
Provides a fixed frequency command value when 151…153 (Digital Inx Sel) is set to
4 Preset Frequencies.
170 Default ➊ 0.0 Hz
171 Default 5.0 Hz
172 Default 10.0 Hz
173 Default 20.0 Hz
174 Default 30.0 Hz
175 Default 40.0 Hz
176 Default 50.0 Hz
177 Default 60.0 Hz
Min./Max. 0.0/400.0 Hz
Display 0.1 Hz
Input State of Digital In
1 (I/O Terminal 05 when
Parameter 151 = 4)
Input State of Digital In
2 (I/O Terminal 06 when
Parameter 152 = 4)
Input State of Digital In
3 (I/O Terminal 07 when
Parameter 153 = 4)
Frequency
Source
Accel/Decel
Parameter
Used ➋
0 0 0 170 (Preset Freq 0) (Accel Time 1)/(Decel Time 1)
1 0 0 171 (Preset Freq 1) (Accel Time 1)/(Decel Time 1)
0 1 0 172 (Preset Freq 2) (Accel Time 2)/(Decel Time 2)
1 1 0 173 (Preset Freq 3) (Accel Time 2)/(Decel Time 2)
0 0 1 174 (Preset Freq 4) (Accel Time 3)/(Decel Time 3)
1 0 1 175 (Preset Freq 5) (Accel Time 3)/(Decel Time 3)
0 1 1 176 (Preset Freq 6) (Accel Time 4)/(Decel Time 4)
1 1 1 177 (Preset Freq 7) (Accel Time 4)/(Decel Time 4)
Jog Frequency
Sets the output frequency when the jog command is issued.
Parameter Number 178
Related Parameters 135, 151, 152, 153, 154, 179
Access Rule GET/SET
Data Type UINT
Group Advanced Program Group
Units 0.1 Hz
Minimum Value 0.0
Maximum Value 400.0
Default Value 10.0