User Manual
Bulletin 283 CIP Information C-5
Table C.7 DeviceNet Object Instance Attributes
The following services are implemented for the DeviceNet Object:
Table C.8 DeviceNet Object Common Services
Assembly Object — CLASS CODE
0x0004
The following class attributes are supported for the Assembly Object:
Table C.9 Assembly Object Class Attributes
All of the various instances of the assembly object will support
attribute 3. The following table summarizes the various instances that
are supported:
Attribute ID Access Rule Name Data Type Value
1 Get/Set Node Address USINT 0 - 63
2 Get/Set Baud Rate USINT
0=125K
1=250K
2=500K
3 = 1M ➊
5Get
Allocation Info
Allocation Choice
Master Node Addr
Structure of:
BYTE
USINT
Allocation_byte*
0…63 = address
255 = unallocated
8 Get MAC ID Switch Value BOOL 0-63
➊ 1M baud is only available on the Bulletin 283A.
*Allocation_byte Bit 0 Explicit messaging
Bit 1 Polled I/O
Bit 4 COS I/O
Bit 5 Cyclic I/O
Bit 6
Acknowledge Suppression
Service
Code
Implemented for:
Service
Name
Class Instance
0x0E Yes Yes Get_Attribute_Single
0x10 No Yes Set_Attribute_Single
0x4B No Yes
Allocate_Master/Slave
_Connection_Set
0x4C No Yes
Release_Master/Slave
_Connection_Set
Attribute ID Access Rule Name Data Type Value
2 Get Max Instance UINT 190