User Manual
Appendix B
Bulletin 280/281 CIP Information
Electronic Data Sheets Electronic Data Sheets (EDS) files are specially formatted ASCII
files that provide all of the information necessary for a configuration
tool (e.g. RSNetWorx™ for DeviceNet™) to access and alter the
parameters of the device. The EDS file contains all of the device
information: number of parameters, groupings, parameter name,
minimum, maximum, and default values, units, data format and
scaling.
EDS files for all the ArmorStart
®
Distributed Motor Controller units
are available from the Internet at
http://www.ab.com/networks/eds.
They may also be built automatically by some configuration tools
since all of the information necessary for a basic EDS file may be
extracted from the ArmorStart Distributed Motor Controller.
DOL Type Product Codes and Name
Strings
Product codes for DOL starters (and DOL Reversing starters) are
based on the Overload relay current rating and the control power
rating of the starter. The following table lists the product codes for the
Bulletin 280 Distributed Motor Controllers:
Table B.1 Bul. 280 Distributed Motor Controller Product Codes and Name
Strings
➊ 133= PointBus Motor Starter
➋ 22= Motor Starter
280A
Device
Type
➊
280D
Device
Type
➋
Product
Code
Contactor
Size Code
Overload
Current Rating
Control Power
Voltage
133 22 0x8A 100C-12 0.24…1.2 A 24V DC
133 22 0x81 100C-12 0.5…2.5 A 24V DC
133 22 0x82 100C-12 1.1…5.5 A 24V DC
133 22 0x83 100C-23 3.2…16 A 24V DC
133 22 0x8B 100C-12 0.24…1.2 A 120V AC
133 22 0x84 100C-12 0.5…2.5 A 120V AC
133 22 0x85 100C-12 1.1…5.5 A 120V AC
133 22 0x86 100C-23 3.2…16 A 120V AC
133 22 0x8C 100C-12 0.24…1.2 A 240V AC
133 22 0x87 100C-12 0.5…2.5 A 240V AC
133 22 0x88 100C-12 1.1…5.5 A 240V AC
133 22 0x89 100C-23 3.2…16 A 240V AC
— — 0x8D — — —