User Manual
5-6 Bulletin 284 Programmable Parameters for Volts per Hertz Controllers
➊ Refers to Source Brake contactor status.
➋ Refers to Output contactor status.
Starter Status
This parameter provides the status of the starter.
Parameter Number 5
Access Rule GET
Data Type WORD
Group DeviceLogix
Units —
Minimum Value 0
Maximum Value 65535
Default Value 0
Bit
Function
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
— — — — — — — — — — — — — — — X Tripped
— — — — — — — — — — — — — — X — Warning
— — — — — — — — — — — — — X — — Running Fwd
— — — — — — — — — — — — X — — — Running Rev
— — — — — — — — — — — X — — — — Ready
— — — — — — — — — — X — — — — — Net Ctl Status
— — — — — — — — — X — — — — — Net Ref Status
— — — — — — — — X — — — — — — — At Reference
— — — — — — — X — — — — — — — — DrvOpto1
— — — — — — X — — — — — — — — — DrvOpto2
— — — — — X — — — — — — — — — — Keypad Jog
— — — — X — — — — — — — — — — — Keypad Hand
— — — X — — — — — — — — — — — — HOA Status
— — X — — — — — — — — — — — — — 140M On
— X — — — — — — — — — — — — — — Contactor 1 ➊
X — — — — — — — — — — — — — — — Contactor 2 ➋