User Manual
Bulletin 284 Programmable Parameters for Volts per Hertz Controllers 5-5
➊ Not available on Bulletin 284A units.
➋ Indicates DB1 Comm Fault for Bulletin 284
Trip Status
This parameter provides trip identification.
Parameter Number 4
Access Rule GET
Data Type WORD
Group DeviceLogix Setup
Units —
Minimum Value 0
Maximum Value 65535
Default Value 0
Bit
Function
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
— — — — — — — — — — — — — — — X Short Circuit
— — — — — — — — — — — — — — X — Overload
— — — — — — — — — — — — — X — — Phase Short
— — — — — — — — — — — — X — — — Ground Fault
— — — — — — — — — — — X — — — — Stall
— — — — — — — — — — X — — — — — Control Power
— — — — — — — — — X — — — — — — IO Fault
— — — — — — — — X — — — — — — — Overtemperature
— — — — — — — X — — — — — — — — Over Current
— — — — — — X — — — — — — — — — Dnet Power Loss ➊
— — — — — X — — — — — — — — — — Internal Comm ➋
— — — — X — — — — — — — — — — — DC Bus Fault
— — — X — — — — — — — — — — — — EEprom
— — X — — — — — — — — — — — — — HW Fault
— X — — — — — — — — — — — — — — Restart Retries
X — — — — — — — — — — — — — — — Misc. Fault