User Manual

Bulletin 283 Programmable Parameters 4-11
Starter COS Mask
This parameter allows the
installer to define the change-of-
state conditions that will result in
a change-of-state message
being produced
Parameter Number 19
Access Rule GET/SET
Data Type WORD
Group DeviceNet
Units —
Minimum Value 0
Maximum Value 16383
Default Value 16383
Bit
Function
13 12 11 10 9 8 7 6 5 4 3 2 1 0
————————————— X Tripped
———————————— X — Reserved
—————————— X —— Running Fwd
—————————— X ——— Warning
————————— X ———— Ready
———————— X ————— Net Ctl Status
——————— X —————— Net Ref Status
—————— X ——————— At Reference
————— X ———————— Input 0
———— X ————————— Input 1
——— X —————————— Input 2
—— X ——————————— Input 3
— X ———————————— HOA Status
X ————————————— 140M On