User Manual

1–4 Introduction to StrataScan Bar Code Readers

Publication 2755-6.13

4. Install the interface box.

Reference

Mount the interface box to your mounting surface after having attached the sensor/relay leads to the

sensor terminal block inside the interface box. Make sure that the 3 power leads from the interface

box power cord are connected to their correct locations on the power terminal block and grounding

posts terminals inside the interface box case.

Chapter 4

(Installing Your

Hardware)

Screw Holes

Interface

Box

Interface

Box

Sensor Terminal Block

Sensor

Cable

Sensor housing

Power Terminal Block

To Power Receptacle

Power Cable

Grounding posts