User Manual

4–5Installing the Decoder
Publication 2755-833
Figure 4.4 shows the available power cord options for the NEMA
Type 4 decoder. Unless an alternate power cord is ordered, the
decoder is shipped with a 120/240 VAC, three wire (U.S. Color
Code) unterminated power cord.
Figure 4.4 Power cord options for NEMA Type 4 Decoder
Power Cord Options
Brown (Line) Blue (Neutral) Green/Yellow (Earth Ground) Green (Earth Ground) White (Neutral) Black (Line)
1
0
ON/OFF
Toggle Switch
Power
Connector
Line
Neutral
Ground
① 120/240 VAC three wire unterminated power cord (U.S. color code) 6
ft./1.83 m length. Default. Shipped with decoder unless otherwise specified.
② 240 VAC, three wire unterminated power cord (European Harmonized Code)
6 ft./1.83 m. Note: UL listing/CSA approval not applicable when this cord is
used.
① ②
!
ATTENTION: Disconnect incoming power and make
sure the power switch on the decoder is in the off
position before connecting power cord to power
source.