User Manual

Decoder Configuration AddressesA–10
Publication 2755-833
Decoder Function or Command Addresses
Refer to Chapter 16 for additional information on the use of these
commands and functions.
Address Command
0600H Clear package counts
0604H Clear primary count 1
0608H Clear primary count 2
060CH Clear primary count 3
0610H Clear primary count 4
0614H Clear primary count 5
0618H Clear primary count 6
061CH Clear primary count 7
0620H Clear primary count 8
0624H Clear symbols not read count
0630H Clear all primary counts
0631H Clear all primary counts and symbols not read count
0632H Save configuration to Storage Memory and restart
0633H Set configuration to default values
0634H Start scan A
0635H Stop scan A
0636H Flush current packet from host buffer
0637H Restart decoder
0640H Send repeat read
0641H Cancel repeat read
0642H Clear all Extended counts
0643H Auto–Load Start
0644H Auto–load End
0650H
Hold output 1 open
➀
0651H
Hold output 2 open
➀
0652H
Hold output 3 open
➀
0653H
Hold output 4 open
➀
0654H
Hold output 5 open
➀
0655H
Hold output 6 open
➀
0656H
Hold output 7 open
➀
0657H
Hold output 8 open
➀
0660H
Hold output 1 closed
➀
0661H
Hold output 2 closed
➀
➀ The AUX port supports a terminal for either configuring the decoder or for ma
n
entry. For information on use of the AUX port for manual data entry, consult Ch
a