User Manual

15–61ASCII Host Commands
Publication 2755-833
IB - Configure Scanner B Source Identifier
Command Format:IBlstring
Function: Defines a source identifier for Scanner B.
Source identifiers are included in messages sent
to the host. They identify whether the data was
scanned (by Scanner A or B) or entered at the
AUX terminal.
NOTE: This command is valid only for dual
head decoders.
Parameters: lstring
Command
Parameter
Parameter Function Valid Values
l Length of source identifier 0 to 4①
String Characters in source identifier Up to 4 characters
① A zero length string will disable the source identifier.
Response: = rr <end>
rr = response code
<end> = end of message control code
Example:
Command: IB4SCNB
Parameters: 4SCNB
Command
Parameter
Parameter Function Values
l Length of source identifier 4
String Characters in source identifier SCNB
Response: = 00LF
00 = command complete
response code
LF= end of message control code
for Line Feed