User Manual

Chapter 14
Publication 2755-833
Display and
System Configuration
This chapter describes how to use the bar code decoder configuration
software to:
• Display bar code strings
• Display decoder performance indicators and counters
• Reset status and counters
• Restart the system
• Select a new language option
• Save the current configuration.
To use the built-in configuration menus and screens, you must first
connect a terminal to the RS-232 AUX port of the decoder.
Appendix D provides details on how to connect and setup each
terminal. The AUX port communication parameters are:
• 8 Data Bits
• 1 Stop Bit
• 9600 Baud Rate
• Parity None
• XON/XOFF Flow Control
Refer to Chapter 5 for information on getting started with the AUX
communication software.
Chapter Objectives
Connect and Set Up
AUX Terminal