User Manual

Chapter 4

Configuring Your Decoder

4–42

8) Press the [SPACE] key to display the the Valid Package response mode:

------- MESSAGE FORMAT ------- ------- HOST COMM -------

SEND BAR CODE DATA: Yes BAUD RATE: 9600

SEND PACKAGE COUNT: No BITS/CHAR: 8 Data, 1 Stop

SEND BAR CODE TYPE: No PARITY: None

SEND SOURCE IDENTIFIER: No

SEND HEADER MESSAGE: No ACK CHAR: None

SEND NO-READ MESSAGE: Yes NAK CHAR: None

START SCAN CHAR: None

EXPAND UPC-E: Yes STOP SCAN CHAR: None

SOURCE IDENTIFIER: LARGE BUFFER: No

LABEL DELIMITER: None RESPONSE MODE: Valid Package

START CHAR: None HOST PROTOCOL: RS232

END MESSAGE: CRLF DEVICE ADDRESS: 01

TRANSMISSION CHECK: None

HEADER MESSAGE:

NO-READ MESSAGE:

CODE 39 CHECK CHAR: No SEND: No ---PACKAGE DETECT INPUT---

I 2-OF-5 CHECK CHAR: No SEND: No FILTER: No

CODABAR CHECK CHAR: No SEND: No SENSE: LO = Package

SELECT -- Cancel: ESC Change: SPACE Enter: RETURN

9) Press the [RETURN] key to enter the value and use [RETURN] and arrow

keys to position the cursor at the NO-READ MESSAGE field. Press the

[SPACE] bar. Type a NO-READ message into the empty field: