User Manual

Chapter 4

Configuring Your Decoder

4–12

ASCII Control

Character

Enter:

ASCII Control

Character

Enter:

ASCII Control

Character

Enter:

NUL %@ VT %K SYN %V

SOH %A FF %L ETB %W

STX %B CR %M CAN %X

ETX %C SO %N EM %Y

EOT %D SI %O SUB %Z

ENQ %E DLE %P ESC %[

ACK %F DC1 %Q FS %\

BEL %G DC2 %R GS %]

BS %H DC3 %S

∧

HT %I DC4 %T US %

LF %J NAK %U

SELECT FIELDS- To change the contents of a select field, press the

[SPACE] key. After pressing the [SPACE] key, he next option is displayed

and the decoder will display the control keys you can use at the bottom of the

screen. All other keys are ignored:

SELECT -- Cancel:ESC Change:SPACE Enter:RETURN

Press the [SPACE] key again until the option you want is displayed. Press

the [RETURN] key to enter the selected option.

When you first enter either setup screen you will observe the following at the

bottom of the display:

Change:SPACE Cursor Control: ARROWSCommands : ESC

Notice that the command bar display provides a quick reference to the

commands used to edit the setup screen. If you select the command bar by

pressing the [ESC] key, the following will be displayed:

COMMAND - - Exit: ESC Select: RETURN Next Command: SPACE

THIS PAGE RECALL SAVE DEFAULT

After selecting the command bar, you will notice that the first command

option NEXT PAGE is highlighted in reverse video. To display the other

Command Bar