Manual

Scanner Configuration (for AdaptaScan Pass Through Cable) 2-25
Publication 2755-6.5
AdaptaScan Pass Through Cable Configuration
This section provides the configuration bar codes for the AdaptaScan
pass through cable:
• (Catalog No. 2755-HDC-GA2-08)
Scan this label to set the AdaptaScan pass through cable to the following
default settings:
Set AdaptaScan Pass Through Cable Defaults
Item
Default Setting Code on Page:
Baud Rate 9600 2-26
Parity
Even➀
2-27
Stop Bits
2➀
2-28
Data Bits
7➀
2-28
Hardware Handshaking None 2-29
Software Handshaking None 2-30
Beep on BEL Disabled 2-31
Intercharacter Delay 00 2-32
➀ We recommend that you set Parity = None, Stop Bits = 1, and Data
Bits = 8 for communication with the AdaptaScan Bar Code Reader.