Manual

D–2 PLC-5 Controller Application
Publication 2755-6.5
Hardware Connections
The scanner connects to the Channel 0 port of the PLC with an RS-232
Synapse cable (Catalog No. 2755-HFC-SR2-01). The connections are
shown in the scanner user manual (Publication 2755-6.2).
To Channel 0 Port
Power Supply
Scanner Cable
RS-232 Synapse Cable
(2755-HFC-SR2-01)
Scanner
PLC-5
Note: The power supply
should be connected last.
Scanner Configuration
Configure the scanner using the bar codes described in Chapter 1.
The PLC controller does not require any specific scanner configuration.
However, you will need to configure the cable communication
parameters as described on the next page.