Manual

Enhanced Decoder Application A–7
Publication 2755-6.5
Enhanced Decoder Setup for AUX Port Pass Through
You will need to configure the Allen-Bradley Enhanced decoder. Refer
to the Enhanced Decoder user manual (Publication 2755-833).
1. Select Aux Terminal Data Entry (Screen 8) from the Main Menu.
2. Set Enable Keyboard Entry = Yes
3. Save and Exit the configuration.
4. Move internal selector (jumper) to the data entry position on the
system board (B-5, B-6).
5. Make sure the hand-held scanner baud rate = 9600, parity = None,
data bits = 8, and stop bits = 1.
6. See Chapter 13 of Enhanced Decoder user manual (Publication
2755-833) for additional information.