User guide
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Installing Your Hardware
- Important Notes on Scanner Systems
- 1. Unpacking the Equipment
- 2. Setting the Address of the Base/Charger Unit
- 3. Connecting the Host Cable to the Base/Charger Unit
- 4. Mounting the Base/Charger Unit
- 5. Mounting the Power Supply
- 6. Connecting the Power Supply to the Base/Charger Unit and Power Receptacle
- 7. Connecting the Host Cable to the Host Device
- 8. Charging the Battery
- 9. Pairing the Scanner to the Base/Charger Unit
- 3 - Configuring Your Scanner
- 4 - Scanner Operation
- 5 - Maintenance and Troubleshooting
- A - Specifications
- B - Cable Pinouts
- C - Advanced Data Formatting
- Glossary
- Index
- Test Symbols
- Back Cover
Appendix B
Publication 2755-6.3
Cable Pinouts
This appendix provides the pinouts for the following cables:
• RS-232-C, 25-pin DB, male, Txd on Pin 3
(Catalog No. 2755-HCC-BR2-06)
• RS-232-C, 25-pin DB, male, Txd on Pin 2
(Catalog No. 2755-HCC-BR1-06)
• IBM XT/AT keyboard, 5-pin DIN
(Catalog No. 2755-HCC-BP1-06)
• PS/2 keyboard. 6-pin Mini-DIN
(Catalog No. 2755-HCC-BP2-06)
• DEC VT2xx, 3xx, 4xx keyboards
(Catalog No. 2755-HCC-BV1-06)