User guide
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Installing Your Hardware
- Important Notes on Scanner Systems
- 1. Unpacking the Equipment
- 2. Setting the Address of the Base/Charger Unit
- 3. Connecting the Host Cable to the Base/Charger Unit
- 4. Mounting the Base/Charger Unit
- 5. Mounting the Power Supply
- 6. Connecting the Power Supply to the Base/Charger Unit and Power Receptacle
- 7. Connecting the Host Cable to the Host Device
- 8. Charging the Battery
- 9. Pairing the Scanner to the Base/Charger Unit
- 3 - Configuring Your Scanner
- 4 - Scanner Operation
- 5 - Maintenance and Troubleshooting
- A - Specifications
- B - Cable Pinouts
- C - Advanced Data Formatting
- Glossary
- Index
- Test Symbols
- Back Cover
A–2 Specifications
Publication 2755-6.3
Description
Standard Range
(Catalog No.
2755-HCG-4)
Long Range (Catalog
No. 2755-HCG-7)
Frequency Control Programmable Synthesizer
Frequency Range 2.4 to 2.5G Hz
Frequency Resolution 250K Hz steps
Frequency Stability
± 20 ppm
Conducted RF Power Output 10 dBm
Radiated RF Power 1 mW (<50 mV/m @3m)
Output Bandwidth
250K Hz @ – 3 dB
500K Hz @ – 20 dB
Ambient Light Immunity
Artificial Lighting 450 ft candles (4844 lux)
Sunlight 8000 ft candles
(86112 lux @8 in. on
low density bar codes)
8000 ft candles
(86112 lux)
Durability 6 ft (8 m) drop to concrete
Operating Temperature
32_ F to 104_ F (0_ C to 40_ C)
Storage Temperature
-40_ F to 140_ F (-40_ C to 60_ C)
Humidity 5 to 95% noncondensing
Height 6.3 in. (16 cm)
Length 5 in. (12.7 cm)
Width 2.8 in. (7.1 cm)
CDRH Class I, II II
Agency Certification
•CSA certified
•UL listed