User guide
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Installing Your Hardware
- Important Notes on Scanner Systems
- 1. Unpacking the Equipment
- 2. Setting the Address of the Base/Charger Unit
- 3. Connecting the Host Cable to the Base/Charger Unit
- 4. Mounting the Base/Charger Unit
- 5. Mounting the Power Supply
- 6. Connecting the Power Supply to the Base/Charger Unit and Power Receptacle
- 7. Connecting the Host Cable to the Host Device
- 8. Charging the Battery
- 9. Pairing the Scanner to the Base/Charger Unit
- 3 - Configuring Your Scanner
- 4 - Scanner Operation
- 5 - Maintenance and Troubleshooting
- A - Specifications
- B - Cable Pinouts
- C - Advanced Data Formatting
- Glossary
- Index
- Test Symbols
- Back Cover
Maintenance and Troubleshooting 5–9
Publication 2755-6.3
Conditioning the Battery
If you are using a battery for the first time or notice a decrease in
battery life:
1. Insert the battery into an adapter on the 4-slot battery charger.
2. Depress the PRESS TO CONDITION button for two seconds on
the 4-slot battery charger.
PRESS TO CONDITION Button
Pressing the PRESS TO CONDITION button performs a complete
discharge of the battery and will recharge the battery to full capacity.
Conditioning eliminates the situations that may cause the battery to
deliver less than its rated capacity. Conditioning may take 3–6
hours.