User guide
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Installing Your Hardware
- Important Notes on Scanner Systems
- 1. Unpacking the Equipment
- 2. Setting the Address of the Base/Charger Unit
- 3. Connecting the Host Cable to the Base/Charger Unit
- 4. Mounting the Base/Charger Unit
- 5. Mounting the Power Supply
- 6. Connecting the Power Supply to the Base/Charger Unit and Power Receptacle
- 7. Connecting the Host Cable to the Host Device
- 8. Charging the Battery
- 9. Pairing the Scanner to the Base/Charger Unit
- 3 - Configuring Your Scanner
- 4 - Scanner Operation
- 5 - Maintenance and Troubleshooting
- A - Specifications
- B - Cable Pinouts
- C - Advanced Data Formatting
- Glossary
- Index
- Test Symbols
- Back Cover
3–10 Configuring Your Scanner
Publication 2755-6.3
Codabar Two Lengths
Allows you to decode a Codabar symbol containing two selected
lengths of characters.
I 2 of 5 Any Length
Allows you to decode an I 2 of 5 symbol containing any number of
characters.
I 2 of 5 Length Within Range
Allows you to decode an I 2 of 5 symbol within a specified range of
characters.
I 2 of 5 One Length
Allows you to decode an I 2 of 5 symbol containing a selected length
of characters.
I 2 of 5 Two Lengths
Allows you to decode an I 2 of 5 symbol containing two selected
lengths of characters.
D 2 of 5 Any Length
Allows you to decode a D 2 of 5 symbol containing any number of
characters.
D 2 of 5 Length Within Range
Allows you to decode a D 2 of 5 symbol within a specified range of
characters.
D 2 of 5 One Length
Allows you to decode a D 2 of 5 symbol containing a selected length
of characters.