User guide
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Installing Your Hardware
- Important Notes on Scanner Systems
- 1. Unpacking the Equipment
- 2. Setting the Address of the Base/Charger Unit
- 3. Connecting the Host Cable to the Base/Charger Unit
- 4. Mounting the Base/Charger Unit
- 5. Mounting the Power Supply
- 6. Connecting the Power Supply to the Base/Charger Unit and Power Receptacle
- 7. Connecting the Host Cable to the Host Device
- 8. Charging the Battery
- 9. Pairing the Scanner to the Base/Charger Unit
- 3 - Configuring Your Scanner
- 4 - Scanner Operation
- 5 - Maintenance and Troubleshooting
- A - Specifications
- B - Cable Pinouts
- C - Advanced Data Formatting
- Glossary
- Index
- Test Symbols
- Back Cover
3–6 Configuring Your Scanner
Publication 2755-6.3
Parameter Selections
The following table lists the parameters that are applicable for use
with either the RS-232C device or the keyboard wedge device.
Host Type
Parameter
RS-232C Keyboard Wedge
Host Interface
• •
Code Types
• •
Code Lengths
Code 39
• •
Code 128
• •
Codabar
• •
I 2 of 5
• •
D 2 of 5
• •
MSI Plessey
• •
Decode Options
Transmit UPC-A Check Digit
• •
Transmit UPC-E Check Digit
• •
Convert UPC-E to UPC-A
• •
EAN Zero Extend
• •
Transmit No Decode Message
• •
Decode UPC/EAN Supplemental
• •
ITF-14/EAN-13 Conversion
• •
Transmit Code 39 Check Digit
• •
MSI Plessey Check Digit
• •
Buffer Code 39
• •
Beeper Volume
• •
Table continued on the next page.