User guide
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Installing Your Hardware
- Important Notes on Scanner Systems
- 1. Unpacking the Equipment
- 2. Setting the Address of the Base/Charger Unit
- 3. Connecting the Host Cable to the Base/Charger Unit
- 4. Mounting the Base/Charger Unit
- 5. Mounting the Power Supply
- 6. Connecting the Power Supply to the Base/Charger Unit and Power Receptacle
- 7. Connecting the Host Cable to the Host Device
- 8. Charging the Battery
- 9. Pairing the Scanner to the Base/Charger Unit
- 3 - Configuring Your Scanner
- 4 - Scanner Operation
- 5 - Maintenance and Troubleshooting
- A - Specifications
- B - Cable Pinouts
- C - Advanced Data Formatting
- Glossary
- Index
- Test Symbols
- Back Cover
Chapter 3
Publication 2755-6.3
Configuring Your Scanner
This chapter describes the configuration options for the scanners.
Included are:
• important notes on configuring a scanner
• available symbologies
• scanner bar codes
• scanner default settings
• parameter selections
• parameter descriptions
• configuration sequence
Important Notes on Configuring a Scanner
Be aware of the following when configuring the scanner:
• The scanner bar codes are located in the Hand-Held Cordless Bar
Code Scanners Programming Guide (Publication No. 2755-6.6).
• The scanner may be configured with default values, see
page 3–3. If the default values are suitable for your application,
scan the Set Defaults bar code.