User guide
Table Of Contents
- Front Cover
- Important User Information
- Table of Contents
- Preface
- 1 - Scanner Features
- 2 - Installing Your Hardware
- Important Notes on Scanner Systems
- 1. Unpacking the Equipment
- 2. Setting the Address of the Base/Charger Unit
- 3. Connecting the Host Cable to the Base/Charger Unit
- 4. Mounting the Base/Charger Unit
- 5. Mounting the Power Supply
- 6. Connecting the Power Supply to the Base/Charger Unit and Power Receptacle
- 7. Connecting the Host Cable to the Host Device
- 8. Charging the Battery
- 9. Pairing the Scanner to the Base/Charger Unit
- 3 - Configuring Your Scanner
- 4 - Scanner Operation
- 5 - Maintenance and Troubleshooting
- A - Specifications
- B - Cable Pinouts
- C - Advanced Data Formatting
- Glossary
- Index
- Test Symbols
- Back Cover
Index
I–3
Publication 2755-6.3
RS-232 Interface Cable, 1-9
S
Safety Information, 1-4
Scanner , Read Ranges, 1-6
scanners
accessories, 1-9
cables, 1-9
Cleaning the Scan Window, 5-12
configuring, 3-1
default settings, 3-3
features of, 1-2
important notes on installing,
2-2, 4-1
LEDs, 1-3
maintaining the scan window,
5-12
operating, 4-1
pairing to the base/charger unit,
2-16
safety information, 1-4
Scanning Bar Codes, 4-2
scanning ranges, 1-6
specifications, A-1
testing before using, 4-1
troubleshooting, 5-13
Scanning Bar Codes, 4-2
Scanning Ranges, 1-6
Setting the Address of the
Base/charger Unit, 2-3
specifications
4-slot battery charger, A-3
base/charger unit, A-4
power supply, A-3
scanners, A-1
support, GTS, 5-19
symbologies, 1-4
T
technical support, 5-19
Testing Your Scanner, 4-1
troubleshooting
4-slot battery charger, 5-16
scanners, 5-13
U
Unpacking the Equipment, 2-2
W
warning
laser light, P-4
safety label, 1-5