User Manual Owner manual

Publication 2727-UM001D-EN-P - March 2004
5-24 Communications Configuration
Disabling LEAP
Follow the steps below if you ever need to disable LEAP.
1. Double-tap the Cisco ACU icon or select
Start/Programs/Cisco/Aironet Client utility. The ACU screen
appears.
2. Select LEAP under Property.
3. Select Disabled in the Value box.
4. Click OK to disable LEAP and to exit the utility.
Personal Computer
Serial Communications
Minimum Personal Computer Requirements
• Microsoft Windows NT Workstation 4.0 (Service Pack 3 or
greater) or Windows 95, Windows 98/98SE, Windows 2000
(Professional version), Windows ME.
• Pentium processor
• 16 MB memory for Windows 95 or Windows 98
32 MB memory for Windows NT or Windows ME
64 MB memory for Windows 2000
• 10 to 50 MB available hard disk space
• 9 or 25 pin available communications port
• One CD-ROM drive
• VGA graphics card
• Keyboard
• Mouse or compatible pointing device
TIP
During the 60 seconds before the timeout
occurs, WLM is running in the background. It is
hidden and does not appear as a running
program. If you try to start WLM during this
time, nothing happens because it is already
running.