Owner manual

MobileView Junction Box 3
Publication 2727-IN010A-EN-P - May 2004
Mounting the Junction Box on a DIN Rail
Mount the Junction Box on a DIN rail inside the enclosure.
Attach DIN Rail Adapter to MobileView Terminal
Attach the DIN Rail Adapter to the back of the Junction Box using the screws
provided.
To install the Junction Box on a DIN rail:
1. Mount the DIN rail.
2. Hook the top slot of the adapter over the DIN rail.
3. While pressing the Junction Box against the DIN rail, snap the Junction Box
into position.