User Manual Owner's manual

92 Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013
Chapter 4 Windows CE Operating System
8. Click Restore.
The restore automatically includes advanced
network and display settings if this option was
checked when the backup was performed.
9. Click Yes to start the restore.
The terminal starts the restore process. It can take a
few minutes.
When the restore has completed successfully, the terminal restarts.
IMPORTANT
d
Do not remove the USB flash drive or SD card, or
power off the terminal during the restore. This
could corrupt the firmware.
If the restore fails, you need to reset the terminal
from the maintenance menu.
Refer to Access Maintenance Operations
on
page 170 for details.