User Manual Owner's manual

138 Rockwell Automation Publication 2711P-UM006C-EN-P - April 2013
Chapter 6 Terminal Connections
USB Ports
The terminals have one or two USB 2.0 host ports and one USB 2.0 device port.
Figure 14 - USB Ports
USB Host Port
USB Device Port
Mini USB Device Port
USB Host Ports
700 to 1500 Terminal
400 or 600 Terminal
IMPORTANT
The USB host and device ports are intended only for temporary use and must
not be used for runtime operations.
Table 61 - USB Device Support
USB Port Type Supported USB Devices Tips
Host Ports (type A) • Keyboard or mouse, HID devices with
native device drivers
• USB flash drives for external storage
• Supported printers
• Cameras, modems, and bar code
readers
For a list of compatible devices, go to: http://
www.rockwellautomation.com/knowledgebase
and search the Knowledgebase for ID 115072.
USB flash drive volumes are named USB Storage,
USB Storage2,... USB flash drive partitions are
managed by Storage Manager in the Control Panel.
Device Port
(Type B or mini-B)
Host computer with the USB remote
RNDIS network deice driver installed.
For details on how to install the USB remote NDIS
driver on a computer and configure the terminal for
the USB connection, go to http://
www.rockwellautomation.com/knowledgebase
and search the Knowledgebase for ID 115608.
IMPORTANT
Refer to page 29 for information on using the USB host ports and USB
peripheral devices in hazardous locations.