User Manual

Backlight Replacement 5
Publication 2711P-IN019D-EN-P - February 2007
7. Lift the back of the display module away from the bezel.
Work on a clean, flat, stable surface to protect the display from debris,
scratches and damage.
8. Detach all connectors, maximum of three.
The number of connectors varies by model.
• IrDa connector, if present
• Function key connector
• Touch screen connector
9. Set bezel aside.
IMPORTANT
The 700 series C display is not secured by screws and is only retained by a
bracket. Use care not to drop the display once the bezel is removed.
Display Module Bezel