User guide

ManualsBrandsRockwell Automation ManualsEquipment2711P-RAT12E2 Adapter Kit for PanelView 1200/1200E Touch Screen Terminal Cutout

Publication 2711P-IN014D-EN-P - July 2007

Installation Instructions

Adapter Kit for PanelView 1200/1200e Touch

Screen Terminal Cutout

Catalog Numbers 2711-NR5T, 2711P-RAT12E2

About This Publication

This publication shows how to use the cutout adapter kit to mount the following

terminals into an existing PanelView 1200/1200e touch screen terminal cutout.

• PanelView 1000/1000e touch screen

• PanelView Plus 1250 touch screen

• PanelView Plus CE 1250 touch screen

• RAC6182 12.1 in. touch screen

Topic Page

About This Publication 1

Important User Information 2

About the Cutout Adapter Plate 3

Parts List 3

Required Tools 4

Disconnect Power to the Terminal 4

Remove the Existing Terminal from the Panel 4

Attach the Cutout Adapter Plate to the Panel 5

Mount the New Terminal in the Cutout Adapter Plate 6

Additional Resources 7

Summary of content (8 pages)

PAGE 1
Installation Instructions Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Catalog Numbers 2711-NR5T, 2711P-RAT12E2 Topic Page About This Publication 1 Important User Information 2 About the Cutout Adapter Plate 3 Parts List 3 Required Tools 4 Disconnect Power to the Terminal 4 Remove the Existing Terminal from the Panel 4 Attach the Cutout Adapter Plate to the Panel 5 Mount the New Terminal in the Cutout Adapter Plate 6 Additional Resources 7 About This Publication
PAGE 2
Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Important User Information Solid state equipment has operational characteristics differing from those of electromechanical equipment. Safety Guidelines for the Application, Installation and Maintenance of Solid State Controls (publication SGI-1.1 available from your local Rockwell Automation sales office or online at http://literature.rockwellautomation.
PAGE 3
Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout 3 About the Cutout Adapter Plate The cutout adapter plate is designed to fit into the existing cutout and stud-mounts for the PanelView 1200/1200e terminals with minor modifications. See the cutout assembly directions. Dimensions are given in inches (mm). Front and Side Views 0.35 (3) 5.19 (132) 0.84 0 (21) 13.20 (335) 9.49 (241) 14.34 (364) 13.84 (352) Front Bezel 13.09 (332.5) Gasket 8.90 (226) #10-32 Mounting Studs TYP 12 PLS.
PAGE 4
Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout Required Tools These items are required to install the cutout adapter plate. • • • • • • • • Center punch Scriber Hammer Power jig saw Power drill with 7/32 inch (6 mm) drill bit Socket driver with 3/8 inch socket Torque wrench capable of 1.1 Nm (10 lb-in) Metal file To install the terminal, you need a slot or Phillips screwdriver.
PAGE 5
Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout 5 Attach the Cutout Adapter Plate to the Panel Follow these steps to attach the cutout adapter plate to the panel. 1. Align the cutout adapter template to the desired position. The cutout adapter plate for the new terminal does not fit exactly over the existing PanelView 1200/1200e terminal cutout and stud-mounts. The new terminal is wider than the 1200/1200e terminal and requires a greater width in the panel, so modifications are required.
PAGE 6
Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout 6. Using the 12 nuts with flat and lock washers, fasten the cutout adapter plate to the panel. Tighten the washers until the gasket is slightly compressed against the front of the panel. 7. Using the torque wrench, tighten the nuts to not more than 1.1 Nm (10 lb-in) to maintain the NEMA Type 4X rating. Do not overtighten.
PAGE 7
Adapter Kit for PanelView 1200/1200e Touch Screen Terminal Cutout ATTENTION 7 Tighten the mounting clips to the specified torque to provide a proper seal and to prevent potential damage to the product. Allen-Bradley assumes no responsibility for water or chemical damage to the product or other equipment within the enclosure because of improper installation. The new terminal is now ready for operation. Additional Resources You can view or download publications at http://literature.rockwellautomation.
PAGE 8
Rockwell Automation Support Rockwell Automation provides technical information on the Web to assist you in using its products. At http://support.rockwellautomation.com, you can find technical manuals, a knowledge base of FAQs, technical and application notes, sample code and links to software service packs, and a MySupport feature that you can customize to make the best use of these tools.