User guide

5–3Configuring Communications Settings for 1000e/1200e/1400e Application Transfers
Publication 2711E-6.8 – January 1998
If you have this
communication
hardware
Select the corresponding driverChoose one of these
driver packages
Select Network
Type and
Address
Decide which
transfer link to use
1770-KFC
Network Direct ControlNet Internal File Transfer
Utility
Serial 1 or 2
WIN LINX 1770-KFC to ControlNet (DH+ Mode)
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8
Remote I/O
Pass-Through
ControlNet Internal File Transfer
Utility
Serial 1 or 2
WIN LINX 1770-KFC to ControlNet (DH+ Mode)
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8
1784-KTC Network Direct ControlNet WIN LINX 1784-KTC to ControlNet (DH+ Mode)
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8
Remote I/O
Pass ou
ControlNet WIN LINX 1784-KTC to ControlNet (DH+ Mode)
Pass-Through
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8
1784-KTCX Network Direct ControlNet WIN LINX 1784-KTC to ControlNet (DH+ Mode)
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8
Remote I/O
Pass ou
ControlNet WIN LINX 1784-KTC to ControlNet (DH+ Mode)
Pass-Through
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8