User guide

4–2 Downloading 1000e/1200e/1400e Application Files
Publication 2711E-6.8 – January 1998
3. To change the settings, press the Baud Rate, Parity, or Error
buttons to move the check mark to the setting you want.
• Baud RateThe speed at which data is transmitted over the
serial cable. The default setting for a serial transfer is
9600 baud.
• ParityUsed for checking data transferred between the
development computer and terminal. The default setting is
None.
• ErrorUsed to check for errors in data transmission and is
either
CRCcyclical (or cyclic) redundancy check.
BCCblock check character. BCC is the default setting.
4. When you have selected the required settings, press OK to exit
this screen.
5. To download an application serially, press the Transfer
Application button on the Terminal Configuration screen to
display the Transfer Application screen.
The following Transfer Application screen is shown.