Quick Start User Manual
Table Of Contents
- 2711C-QS001F-EN-P PanelView Component HMI Quick Start
- Where to Start
- Preface
- Chapter 1
- Chapter 2
- Chapter 3
- Chapter 4
- Chapter 5
- Chapter 6
- Create the Motor Status Screen
- Introduction
- Before You Begin
- What You Need
- Follow These Steps
- Change the Screen Name
- Change the Grid Attributes
- Create the Start Motor Push Button
- Create the Stop Motor Push Button
- Create the Motor Speed Screen Button
- Create a Goto Config Button
- Create the Motor Control List Selector
- Create the Motor Status Indicators
- Save the Motor Status Screen
- Create the Motor Status Screen
- Chapter 7
- Create the Motor Speed Screen
- Introduction
- Before You Begin
- What You Need
- Follow These Steps
- Create a New Screen
- Create the Motor Status Screen Button
- Create a Numeric Entry Object
- Create a Heading for the Numeric Entry Object
- Create a Increment Decrement Object
- Create Increment Decrement Keys
- Create a Bar Graph
- Create a Bar Graph Scale
- Create Text Labels for the Scale
- Create a Bar Graph Heading
- Create a Numeric Display
- Create a Heading for the Numeric Display
- Update the Motor Speed Screen Button
- Create the Motor Speed Screen
- Chapter 8
- Chapter 9
- Appendix A
- Back Cover
60 Publication 2711C-QS001F-EN-P - November 2010
Chapter 6 Create the Motor Status Screen
4. Select row 3, hold down the
Shift key, and select row 4.
5. Click the Delete button.
6. Edit state 1 (row 1).
a. Replace the Item1 text
with AUTOMATIC.
b. Set the Font Size to 17.
c. Click the ... button in the
Alignment field, and
select Center Left.
Scroll to the right to see all
the fields.
7. Edit state 2 (row 2).
a. Type 0 in the Value field.
b. Replace the Item2 text
with MANUAL.
c. Set the Font Size to 17.
d. Select Center Left in the
Alignment field.
8. Click row 1 to make this the
displayed state.
9. Click OK to close the editor.