User guide
Table Of Contents
- 2711-UM010B-EN-P, PanelBuilder 1200 Transfer Utility
- Important User Information
- Table of Contents
- Preface
- 1 - Introduction to the PanelView 1200 Transfer Utility
- 2 - Setting up the PanelView 1200 Transfer Utility
- 3 - Transferring Application Files Serially
- 4 - Transferring Via the Data Highway Plus and Remote I/O
- 5 - Transferring Application Files with User PROMs
- A - Troubleshooting
- Glossary of Terms
- Index
- Back Cover
Glossary
G-1
Glossary of Terms
Application
An application is the collection of data (the screens, messages, and
configuration data) that you create in PanelBuilder 1200 and run in the
PanelView 1200 terminal.
Battery-Backed RAM
Application files are stored in the PanelView 1200 terminal’s random
access memory (RAM), backed by an internal battery. When AC power is
switched off, the application file and the status of retentive objects are
maintained.
Download
The process of transferring an application file from the development
computer to the PanelView 1200 terminal, so the application file can be
run.
Hex Files
Application files which have been converted into Intelt Hex format for
transfer to user PROMs.
PanelBuilder 1200 Configuration Software for Windows
The software is used to develop application files for the PanelView 1200
terminal. It runs in Microsoft Windows on the development computer.
PanelView 1200 Terminal
This operator interface is a type of Allen-Bradley terminal with a touch
screen or keypad, designed for operator interaction with a PLC system
over the Remote I/O link.
To be able to run applications created in PanelBuilder 1200 Configuration
Software for Windows, the PanelView 1200 terminal must have Version
5.0 or higher version firmware.