Owner's manual

4 Display Backlight for PanelView 1000 (Series B) and 1000e (Series D or Later)
Publication 2711-IN019B-MU-P - March 2002
To Remove the Backlight
1. Turn off the power to the PanelView terminal.
2. Lay terminal on front. Remove four screws from the hinged plate.
(PanelView 1000 screws are captive.)
3. Lift hinged plate.
4. Remove screws holding backlight cover plate and remove plate.
TIP
Backlight cover plate screws are very small. Use caution not to
lose them inside of terminal.
Hinged Plate Screws
Hinged Plate Screws
Hinged Plate Screws
Hinged Plate Screws
PanelView 1000e
PanelView 1000