Quick Start Manual User Manual

Publication 2711-QS003D-EN-P - June 2009 81
Application Programs Appendix A
Ladder Logic Programs
Ladder logic files are provided on the PanelBuilder32 installation CD.
ControlLogix Controller Programs (\QuickStart\CL directory)
File Name Use with this Application Page
cnet_sch.acd • ControlLogix in slot 0
• ControlLogix 1756-CNB module in slot 1
• Scheduled messages
83
cnet_unsch.acd • ControlLogix in slot 0
• ControlLogix 1756-CNB module in slot 1
• Unscheduled messages
84
dhp.acd • ControlLogix in slot 0
• 1756-DHRIO module in slot 1
• Channel 1 of DHRIO set for 57.6K baud
85
dnet.acd • ControlLogix in slot 0
• ControlLogix 1756-DNB module in slot 1
• Baud rate set at 125K
86
rio.acd • ControlLogix in slot 0
• IP Address is 10.0.0.1
• 1756-DHRIO module in slot 1
• Channel 2 of DHRIO set for 57.6K baud
87
enet.acd • ControlLogix in slot 0
• 1756-ENET/B module in slot 1
• Network Addressing is message type
88
PLC-5 Controller Programs (\QuickStart\PLC directory)
File Name Use with this Application Page
cnet.rsp • PLC-5C controller 106
dhp_df1.rsp • Any enhanced PLC-5 controller for DF1
• Any PLC-5 controller for DH+
108
dnet.rsp • Any PLC-5 controller
• 1771-SDN DeviceNet scanner in slot 1
110
rio.rsp • Any PLC-5 controller
• Remote I/O port
112
enet.rsp • PLC-5E (Ethernet) controller
• IP Address is 10.0.0.1
114