Quick Start Manual User Manual

Publication 2711-QS003D-EN-P - June 2009 65
Entering Application Tags Chapter 5
ControlNet Unscheduled Application Tags
The table shows application tags used by the ControlNet application
using unscheduled messaging. Tags are shown for a ControlLogix
application. Defaults are accepted for fields not shown in table.
ControlNet Scheduled Application Tags
The table shows application tags used by the ControlNet application
using scheduled messaging. Defaults are accepted for fields not
shown in table.
Tag Name Data Type Tag Address Description
Node
Name
Initial
Value
Min Max
Start_Motor Bit Motor_Control.00 Starts the motor LC_1 0 0 0
Stop_Motor Bit Motor_Control.01 Stops the motor LC_1 0 0 0
Motor_Status_Ind Bit Motor_Control.02 Shows on/off
motor status
LC_1 0 0 0
Motor_Speed Signed
Integer/INT
Motor_Speed[0] Shows the motor
speed
LC_1 0 0 65535
Set_Max_Motor_Speed Signed
Integer/INT
Motor_Speed[1] Sets the maximum
speed
LC_1 1800 600 1800
Speed_Alarm Bit Alarms.00 Triggers alarm
messages
LC_1 0 0 0
Tag Name
Data Type
Tag
Address
Description Node Name
Initial
Value
Min Max
Start_Motor Bit
SI0:0/0
Starts the
motor
ControlNet_Scheduled_
File
00 0
Stop_Motor Bit
S
I0:0/1
Stops the
motor
ControlNet_Scheduled_
File
00 0
Motor_Status_Ind Bit SO0:0/0 Shows on/off
motor status
ControlNet_Scheduled_
File
00 0
Motor_Speed Signed
Integer/INT
SO0:1 Shows the
motor speed
ControlNet_Scheduled_
File
0 0 65535
Set_Max_Motor_Speed Signed
Integer/INT
S
I0:1
Sets the
maximum
speed
ControlNet_Scheduled_
File
1800 600 1800
Speed_Alarm Bit SO0:2/0 Triggers alarm
messages
ControlNet_Scheduled_
File
00 0