Quick Start Manual User Manual

26 Publication 2711-QS003D-EN-P - June 2009
Chapter 2 Overview of Application
Application Screens
The application contains 3 screens.
• Motor Status - contains objects to start or stop a motor, show
the on/off status of the motor, and display the current motor
speed.
• Set Motor Speed - contains a numeric entry object allowing you
to enter a maximum speed for the motor.
If the motor speed is changed, the new speed won’t take effect
until the motor is stopped and started again.
• Alarm Banner - global display that opens over the Motor Status
or Set Motor Speed screen when an alarm is triggered.
Both the Motor Status and Set Motor Speed screen contain a screen
button allowing you to navigate between the two screens.
If you want the operator to access the Configuration Mode menu from
a touch screen terminal, you should include a Goto Config screen
button on the application screen. On keypad only terminals, press the
left and right arrow keys simultaneously on the terminal’s
keypad to display the configuration menu.