Instruction Manual

Preface
P-3
There are two types of user PROM chips that can be used in PanelView
1200 terminal: EPROMs and EEPROMs. EPROMs are Electrically
Programmable Read Only Memory chips. EEPROMs are Electrically
Erasable Programmable Read Only Memory chips.
The user PROMs store application files in memory that is protected from
power failure and failure of the internal battery. A PROM burner is
required to copy application files into a user EPROM.
If your system includes a user EEPROM, application files downloaded
through the Upload/Download cable will be stored in both battery-backed
RAM and in the EEPROM. No PROM burner is required.
Window: An area on the screen containing information. These windows
are triggered by the PLC controller and overlay any screen that is
displayed.
The following related publications provide additional information on
programmable controllers and I/O scanners.
Publication Pub. No.
1772SD/SD2 Remote I/O Scanner/Distribution Panel
17722.18
1775S4A I/O Scanner-Programmer Interface Module User's Manual 17756.5.1
1775S5, 1775SR5 I/O ScannerCommunication Adapter Module User's
Manual
17756.5.5
5150RS PI Startup and Integration Manual 50006.5.1
6008SI IBMt PCt I/O Scanner User's Manual
60086.5.3
6008SV VME I/O Scanner User's Manual 60086.5.2
6008SQ QBus I/O Scanner Utility Software User's Manual 60086.4.1
1771SN Sub I/O Scanner Module Data Sheet 17712.91
1747SN RIO Scanner User's Manual 1747NM005
Publication Pub. No.
1772LP2 PLC2/20 Programming and Operations Manual
17726.8.1
1772LP3 PLC2/30 Controller Programming and Operations Manual 17726.8.3
PLC3 Family Controller Programming Reference Manual 17756.4.1
PLC5 Family Programmable Controllers Hardware Installation Manual 17856.6.1
PLC5 Programming Software 62006.4.7
5250LP1, LP2 PLC5/250 Programming Manual 50006.4.8
SLCt 500 Family of Programmable Controllers Advanced Programming
Software User's Manual
1747NM002
Related Publications