Operator Interface Module Instruction Manual

Chapter 6
Installation
6–5
A cutout template is provided on the inside back cover of this manual to
mark the cutout dimensions. Figure 6.3 provides a reference copy, don’t
remove this page from the manual.
Figure 6.3
Panel Cutout Dimensions in Inches (Millimeters)
6.08 in
.187 in dia.
6 places
3.04 in
4.55 in
5.50 in
3.97 in
.29 in
.29 in
DTAM Micro
Panel Cutout
3.04 in
3.04 inch = 77.22 mm
6.08 inch = 154.43 mm
3.97 inch = 100.84 mm
3.86 inch = 98.04 mm
4.55 inch = 115.57
5.50 inch = 139.70 mm
0.69 inch = 17.53 mm
0.29 inch = 7.37 mm
.69 in
3.86 in
Cutout Template