Operator Interface Module Instruction Manual

Special Controller Functions
Appendix C
DTAM Micro
C–20
Use the Clear Fault function to clear all major and minor faults in the logic
controller.
To clear controller faults:
1. If you are clearing a PLC-5, the controller must be in Program or Remote
Program mode.
2. Select item 4 from the Special Menu to access the Clear Fault function.
You are prompted to clear faults:
1 = Clear Faults
0 =Abort
3. Press [1] to clear the faults or [0] to abort the function.
The faults are cleared and you are returned to the special functions menu:
1 P-A/D 3 Mem Xfer
2 Mode 4 Clr Fault
Using the Clear
Fault Function