Installation Instructions Owner's manual

A–B
Preface
P–1
Using this Manual
This chapter provides an overview of this manual. It covers:
• Chapter contents
• Intended audience
• Package contents
• Conventions
• Related publications
The manual contains the following chapters:
Chapter Title Purpose
Preface Using this Manual Provides an overview of the manual.
1 DTAM Plus Overview
Contains a description of the DTAM Plus
and accessory devices.
2 Loading an Application
Describes how to apply power and
transfer applications between the
computer running the DPS Software and
the DTAM Plus.
3 Using the Function Menu
Describes how to access and use the
DTAM Plus Function menu to perform
terminal operations.
4 Running Applications
Describes the basic screen types and
operating procedures that are common to
most applications.
5 Installation
Provides procedures for mounting the
DTAM Plus. Also provided are wiring
instructions and recommendations.
6
Communication
Connections and Setup
Describes RS-232, RS-485 and Remote
I/O connections. Setup guidelines are
provided for SLC and PLC controllers.
7
Troubleshooting
and Maintenance
Provides assistance in identifying
and correcting common operating
problems. Cleaning recommendations
are also provided.
Appendix A Specifications
Provides the specifications and agency
ratings and European Union Directive
Compliance.
Appendix B DTAM Plus Cable Diagrams
Provides the cable diagrams for the
DTAM Plus.
Appendix C Special Controller Functions Provides the special controller functions.
Appendix D Terminal Mode
Provides the characters when the DTAM
Plus is in terminal Mode.
Appendix E
DTAM Plus Mounting
Template
Provides a mounting template for the
DTAM Plus.
Objectives
Chapter Contents