Installation Instructions Owner's manual

User Manual
DTAM Plus Operator Interface Module
Index
I–2
DF1 Protocol, 1–8, 1–9, 6–3
DH–485, Cable Installation, 6–4
DH–485 Network
Communicating With, 6–9
Settings, 6–9
DH485 Protocol, 1–6, 1–8, 1–9, 6–3
Dimensions
Clearances, 5–3
Cutout, 5–5
Mounting, 5–4
DIP Switch, 1–3
Comm Upload/Download Enable, 1–5
Communication Port Selection, 1–5
Default Settings, 1–11
Descriptions, 1–5
Function Key Enable, 1–5
Master Security Enable, 1–5
Run Setting, 4–1
Terminal Mode Enable, 1–5
Test, 7–6
Upload/Download Setting, 2–5
Display, 1–2
Cleaning, 7–17
Setting Brightness, 3–12
Setting Contrast, 3–11
Test, 7–7, 7–11
Display Brightness, Setting, 3–12
Display Test, 2–3
Downloading, Applications, 2–8
DPS
Description, 1–12
Upload/Download, 1–12, 2–8, 2–13
DTAM Programming Software, See DPS,
1–12
E
Electromagnetic Interference, Limiting, 6–1
Enclosure, 5–3
Enter Key, 1–4
Error Codes, 7–4
Error Messages, 7–2
EXP Key, 1–4
F
Faults, Clearing, C–21
File
ASCII, C–11
ASCII String, C–17
BCD, C–12
Bit, C–6
Block Transfer, C–13
Control, C–9
Counter, C–8
Floating Point, C–10
Input, C–4
Integer, C–6
Message, C–14
PID, C–15
SFC, C–16
Status, C–5
Timer, C–7
Firmware, Version, 2–3
Floating Point File, C–10
Function Key LED, 1–2
Function Key Menu, 3–2
G
Guidelines
Safety, 5–1
Wiring, 6–1
H
Half Duplex, Terminal Mode, 3–14
Handshake, Printer Port, 3–8
Humidity, Operating, 5–2
I
Indicator, LED, 1–2
Input File, C–4
Installation
Clearances, 5–3
Equipment, 5–3
Guidelines, 5–1
Procedures, 5–6
Template, 5–5
Installation Template, E–1
Integer File, C–6
Intended Audience, P–2
K
Keyboard
Functions, 1–4