Installation Instructions Owner's manual

DTAM Plus Operator Interface Module
Index
User Manual
I–1
A
Accessories, 1–13
Advisor, 4–2
Alarm LED, 1–2
Alarm Screen, 4–6
Application
Documentation, 4–1
Downloading, 2–8
Simulation, 3–13
Transfer, 2–1
Uploading, 2–13
Application Files, Running, 4–1
ASCII Characters, D–1
ASCII Display Characters, D–2
ASCII File, C–11
ASCII Input, 1–1, 4–5, 6–13
ASCII String File, C–17
Audience, Intended, P–2
B
Backspace Key, 1–4
Bar Code, Scanners, 6–13
Bar Code Input, 4–5, 6–13
Baud Rate, 3–4, 3–5, 6–6
Printer Port, 3–7
BCD File, C–12
Bit File, C–6
Block Transfer File, C–13
Brightness Key, 1–4
C
Cable, Diagrams, B–1
Cables, Communication, 1–13
CE Key, 1–4
Chapter Descriptions, P–1
Chart, Troubleshooting, 7–1
Cleaning Display, 7–17
Clearances, Mounting, 5–3
Clearing Faults, C–21
Clock/Caledar, Setting, 3–10
Clock/Calendar, Test, 7–15
Codes
Error, 7–4
Master Security, 3–16
Communication
Basic Module, 1–6
Cables, 1–13
Connections, 6–2, 6–3, 6–5
Default Settings, 1–12
DF1, 1–6
Error Codes, 7–4
Parameters, 1–6, 6–6
Ports, 1–3
Remote I/O, 1–7, 1–10
RS–232, 1–6, 1–8
RS–422, 1–6
RS–485, 1–6, 1–9
Setting Parameters, 3–4, 3–5
Setting Printer Port, 3–7
Upload/Download Connections, 2–6, 2–7
Communication Port, Test, 7–9
Connector
Communication, 6–2, 6–3, 6–5
Power, 1–3, 5–7
Contrast, Setting, 3–11
Contrast Key, 1–4
Control Codes–Terminal Mode, D–5
Control File, C–9
Controller
Communicating With, 6–6
File Types, C–3
Screen Changes, 4–2
Controller Mode, C–19
Conventions, P–2
Counter File, C–8
Couplers, Link, 6–4
Cursor Enable, Terminal Mode, 3–15
Cutout, Template, 5–5
D
Data Bits, 3–4, 6–6
Printer Port, 3–7
Data Display Screen, 4–4
Data Entry Screen, 4–4, 4–5
Defaults, 1–11
DF1, Parameters, 1–6