Installation Instructions Owner's manual

Chapter 7
Troubleshooting and Maintenance
7–15
Use the Clock/Calendar test to test the realtime clock in the DTAM Plus.
This test is valid only for terminals with a realtime clock.
1. Use the [NEXT] or [PREV] keys to display Clock/Calendar test on the
test selection screen.
DTAM Plus Diagnostic
NEXT to Select Test
ENTER To Initiate
Clock/Calendar
2. Press [ ] to initiate the test.
The screen displays the current time and date.
TIME 01:17:25
DATE Wed Aug 12 98
Press ENTER
3. Pressing [ ] terminates the Clock/Calendar test.
The next test selection screen is displayed.
DTAM Plus Diagnostic
NEXT to Select Test
ENTER To Initiate
TXEN/ & Alarm
4. To terminate the test function , press the [NEXT] or [PREV] keys to
display Reset DUT in the test selection area. Press [
] to reset the
DTAM Plus.
Clock/Calendar Test