User Manual Manual

1 Publication 2706-UM016D-EN-P - March 2006
Chapter 3
Serial ASCII Communications
Use a PLC5 out Channel
Zero
To use a PLC5 out Channel Zero on a display:
1. Create a new application.
2. Set up the channel configuration.
3. Create a file type String (ST).
This is where the user inserts the ASCII/Hex commands.
4. Set up the ladder logic.
ER
0
B3:0
EN
DN
ASCII Write
Channel 0
String Length 0<
Characters Sent 0<
Source
ST9:0
Control R6:0
0
AWT
1
(End)