Quick Start

Publication 2706-QS001D-EN-P - January 2009
10 InView Marquee Message Display
Configure an EtherNet/IP
Communication Module
Follow these steps to configure an EtherNet/IP communication
module.
What You Need
This list indicates what you need to complete this task:
• Catalog numbers 2706-P22R, 2706-P4x, 2706-P7x, 2706-P9x
• Catalog numbers 2706-PENETP, 2706-PENETM, 2706-PENETK
InView Ethernet modules
• Ethernet cable (user supplied)
• RS-232 serial cable (supplied with Ethernet module)
• RSLinx software
• InView User Manual, publication 2706-UM016
• InView Installation Instructions, publication 2706-IN006
• Communication Module Installation Instructions, publication
2706-IN015
• Communication Module User Manual, publication 2706-UM017
Equipment Setup
Follow these instructions to configure the communication module for
a 2706-P22R display.
• Connect a Class 2, 24V DC power supply.
• Connect the RS-232 (catalog number 2711-NC13) cable to a
personal computer.
TIP
Use a 2706-PENETP module for a 2706-P22R display, a 2706-PENETM
module for a 2706-P4x display, and a 2706-PENETK module for a
2706-P7x or 2706-P9x display.
12345
67 8 9
RS-232
2711-NC13 Cable
Supplied
Network
Communication
Power
Power