USER MANUAL User guide

Publication 2706-6.3
Intended Audience
No specialized knowledge is required to configure and install the
DL40 slave display. However, we assume the following:
• The person responsible for equipment connections is familiar
with standard wiring practices and electrical codes in your area.
• Communication cabling is done by a person having an
understanding of basic communications terminology and cabling.
• Panel cutouts are made using the same methods and safety
practices followed for other panel mounted equipment.
Conventions Used
The following conventions are used in this manual.
• The up caret, ^, may be used in place of [Ctrl] (Control key)
where space is limited.
• Values in a hexadecimal format have the suffix “hex”. For
example “B7 hex”.
Related Publications
You may need to refer to the following related publications: